Hi,
what does the file look like? (Open it in Notepad) This is the one I am
using:
SERVER MONSTERI 00d0b7e3f9a7
USE_SERVER
Where MONSTERI is the Host name of the server and 00d0b7e3f9a7 is the
ethernet address of the networkadapter on the server. A common mistake is to
have the IP-address of the server in the file in stead of the ethernet
address.
Another way to test this is to set the following environment variable on the
workstation:
LM_LICENSE_FILE and give it a value that is equal to the hostname of the
server.
"Frits Blankenzee" wrote in message
news:3664CF0881F9BBE10AE40202341400E3@in.WebX.maYIadrTaRb...
> Hi Kevin.\,
> Thanx for your remark but I had that file in my AutoCAD dir. But it still
> askes at my place for the server,.
> When I find the server AutoCAD wil run perfectly. Thats why I send this
> message
> Greetings Frits Blankenzee
>
> "Kevin Nehls" schreef in bericht
> news:AF12807976A37A5A293DD561E8BD4404@in.WebX.maYIadrTaRb...
> > You need to create a licpath.lic file in the autocad directory on each
> > client.
> >
> > It should read like this, with you filling in the correct information
> >
> > SERVER
> > USE_SERVER
> >
> > This file should have been created during installation based on what you
> > filled in when you created the deployment location.
> >
> > HTH
> > --
> > Kevin Nehls
> >
> >
> >
>
>