Sorry for my quick response earlier, I was running between meetings but still wanted to provide you with something.
Here's a bit more information, inline in orange.
Thanks,
Elliott
----------------
I have a component roadway and I have added a bridge. We want to illustrate the bridge being built on only the south half of the bridge. However the bridge modeler wants to center it under my roadway (see attached PDF).
- Just to confirm, from looking at your bridge, by "south half", do you mean half the width of the bridge? (can't tell cardinal directions from your attached PDF).
The component roadway is showing only 1/2 of the future roadway (South half). Do the experts know of any way to simply offset the entire bridge from the roadway center line to accomplish this? If not, what other suggestions are there?
I'm not certain if there is a way to offset the entire bridge. However, you could try creating your own Road/Deck styles in the Road/Street/Bridge catalog of the Style Palette, and manually adjust the roadway to be narrower than the bridge, similar to what is shown in your example.
Since it wants to center it under the component roadway cross section I thought about modeling the full width but don't know how to peel back and only show the intermin half-built roadway while still showing the full-width piers and maybe even the girders. Is there a way to apply a transparent material to some of the roadway components so it shows through to the bridge?
Toggling Bridge Deck transparency is one option, but it will remove the entire Road/Deck from visibility. However, there definitely are ways to apply transparent materials to roadway components. For starters, take a look at this help topic, which explains the process of applying transparent materials to materials in your Roadway material group. http://help.autodesk.com/view/INFMDR/2016/ENU/?guid=GUID-601ED0C0-9B5A-4B40-85BA-FC872295F73B
Is there a way to export the bridge as a 3-d model and then re-mport it int the correct location as a DAE model or some other format?
You can export the bridge to IMX and open it in Civil 3D, which will recognize the bridge as 3D solids (individual bridge components are separate elements). However, InfraWorks 360 will not recognize this as a bridge when re-imported. See this help topic for more information: http://help.autodesk.com/view/INFMDR/2016/ENU/?guid=GUID-CA5B78BB-9D36-4F52-A840-41D4BBA09C87
Any help would be greatly appreciated as I am trying to get something prepared for a major proposal interview on Monday!!!
Keep the questions coming! If i haven't identified a suitable solution for you, I'm happy to check back over the weekend and answer any questions that I can.
Thanks in advance for your help.
Principal Specialist, Infrastructure