Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi All, we are working on a Yasnac LX3 Turning post processor and would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor with caution and provide any feedback you might have. Thank you.
I appreciate all the help in finding a Yasnac LX3 Post processor that does not reverse (flip) the X axis, I'm not alone, many are looking but to no avail. I have a Mori Seiki SL 15. I've been looking for about two weeks and hoping Fusion 360 (Autodesk) can solve this. I may need to go to another Cad system but would prefer staying with Fusion.
Any help would be appreciated.
I have installed and used the Post processor on Fusion, It's still under development. Other than reversing the X axis it works very well. I've not been able to correct the x axis though.
Fusion 360 Yasnac LX3 post processor ( under development) inverts X axis cutting operations, also when tool is supposed is lift off for the next pass it crashes into the part. I am running a 1989 Mori Seiki SL 15, Yasnac LX-3 controls.
Here is a sample of the code Fusion makes. it works fine on Fusions simulator but not on Yasnac.
I have tried almost everything including reversing the X axis and it still does not change. I can make it to the part but then it goes all wrong.
