Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I know this idea has been posted before, but I have noticed many users have requested the Roland RML post processor to support the 4th axis. Many of these posts were back in 2015-2016, so I would like to suggest it again. If someone has made a modified version to support the 4th axis, that would be great to know.
I am using NC code mode on MDX 540, that is I am using RML iso but it allows me work only xyz i.e. it allows me to create a tool path only on singe surface at a time.
I am selecting stock box point as origin and setting that point as home for G54 on NC mode would like some recommendations on that and It would be really helpful if i could get a better post processor for A axis and Automatic tool changer. Currently I am using one setup for top surface another setup for bottom and flipping the stock manually. Also I am not able to understand if I have to use the bottom surface for machining what should be changed “the tool orientation” or “origin of WCS or setup coordinate system”. And if I get appropriate post processor how should I use the 4th axis machine without stopping the machine.
