Post processor for SCM morbidelli

[mminamisawa]

Does Anyone have the post processor for SCM morbidelli?

I am SCM tech Z5 user in Japan.
I've tried to post using SCM prisma which supplied in fusion360 post library.
but It does not work correctly on my CNC.
I think the "Z" should be possitive number for "morbidelli" machine.
but generic SCM postprocessor gives negative for Z.

I am not good english speaker.
I hope you undestand with your effort for my english.

Thanks,

[danielericciH72MZ]

Hi,

have you solved your issue? i know this post are very old, but i'm tryng to build a post for an accord 40 from scm,

but all my works are with z positive, while my machine have z netative when the tool are into the piece...

i'm sorry for my bad english, i'm from italy.

[Marcelo.Ahlert1 · Accepted solution]

You could try this post I've edited to work with Maestro CNC from SCM

[mminamisawa]

thank you!
I'll try it. 

[nystrom.nils]

Hi. Did it work? Im using a SCM tech z5

[mminamisawa]

Yes, I confirmed it to work correctly 3axis.
I really appreciate to you gave PP. Thank you very much.
Although I don't check the 5axis movement yet, Does its PP suppport to 5axis?

[nystrom.nils]

I get this "redefining arguments is deprecated" warning. Do you know what causes this problem?

Best regards

[nystrom.nils]

[Marcelo.Ahlert1]

This Post is for 3 axis only, I believe the program you are trying to post is a 5 axis program, so the PP can't handle it.

It should work if you use it for 3 axis only.

[alan]

Hi, will this PP work for a SCM ACCORD 20 (3-axis)?

[danielericciH72MZ]

Hi, I'm trying to use the post processor.
My machine has the z axis inverted, when I elaborate a milling program with alphacam, I set negative z if the cutter is in the panel. How can I modify the post so that the machinings all have a negative z?
example: panel 1000x1000x18, pocket 5 mm deep, z = -5 mm in the xilog program.
thanks

[Marcelo.Ahlert1]

Hi, i've tested only on a Pratika, but it uses standard SCM code, you could test it with care on your machine

[Marcelo.Ahlert1]

I've made it work changing the "work depth note" in Maestro to Morbidelli (Z positive).

One thing i've not  solved is the Reference stop, every program I post, ends up mirrored when imported to Maestro, if anyone knows how to solve this, would be of great help.

[Tomek.G · Accepted solution]

Hi @mminamisawa,

The newest SCM post from the library has a property to invert Z axis if necessary.

[mminamisawa]

Thank you for telling it!
it is great update, isn't it.