Post processor for Fanuc 21i 4 axis

[fnavarrop]

Hello, I'm new here, I need some help to get a postprocessor working in Fanuc 21i control for Emco conceptMill 155 machine. I work for a education university of my country.

The generic provided is not working, We have before FeatureCAM but now we're using Fusion 360 (in featureCAM the post edition was so easy to adjust, but in fusion 360 or HSMWOrks, or inventor HSM is so confuse for me at this moment). 

Thanks in advance for the help.

[serge.quiblier]

Hi @fnavarrop 

For editing your post, the following link  will guide you to some informations useful.

The post is containing link to the post editor manual, link to utilities, explanations ...

Have a nice day.

Cheers

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!

[tsmutz5]

Hello,

Attached is a post we use for our Fanuc 21I TB controlled Hyundai L250Y 4 axis lathe.

You'll need to change G and M codes according to your machines programming manual.

Please test carefully and use at your own risk.

Stay safe,

[fnavarrop]

Thanks by your help. will try to do some tests in simulator using this post before use on machine tne G-code generated.