Post processor CNT830

[Anonymous]

Hello, deat "Help"

How i can adaptate a usualy using Geberic Fanuc post  for this type CNT830

So i do only same things.

They are

change  G90 -> G92

delete  another G90 symbols in text same times

delete    G43 Zх. Hх symbols in text same times

delete    G28 G91 Zx  symbols in text same times

not a lot, but doing this each time is not pleasant 

large programs born time looses during prepare text.

I have aviable code list of this CNT830....

* Эффективные G коды:

  G00, G01, G02, G03, G15, G17, G18, G19, G21, G40, G41, G42,

  G43, G44, G49, G54, G55, G56, G57, G58, G59, G64, G69, G73,

  G74, G76, G80, G81, G82, G83, G84, G85, G86, G87, G88, G89,

  G90, G92, G98, G99

* Эффективные M коды:

  M00, M01, M02, M03, M04, M05, M06, M07, M08, M09, M30.

Thanks for a possible solutions....

[parobillard]

Hi!

Is it for a C-tek cnc?

[Anonymous]

Yes!!! KM-100

[Anonymous]

also every time delete 

g94

g49

and its works properly.

Thanks for any ideas....

[parobillard]

I can give you the one I use!

IT IS HIGHLY MODIFIED for my needs

AT YOUR OWN RISK

I use it everyday

note: I use HSMExpress for inventor 2016

[Anonymous]

Thanks a lot. 

i use solidworks and hsm like a addon

and first run post failed.... 

tomorow try again

Thank you very mach.

яя

[Anonymous]

so i see language c++ in the text. very old lang, windows writed on c++.

find a man who talking c++ not big problem. students level ))))

[parobillard]

posts are in javascript not c++

[parobillard]

I made a mistake in the last one I've send try this one

sorry!

[Anonymous]

tryed well

in text i saw

N55 G43 Z220. H01   -  have troubles which this text  - delet all

N15 G21 - not deamand, sad error

G49 - error sad screen... - delete also

G90  -  i use g92  where z0 x0 y0 is a pont in my model. i insert point and say that it is zeri point  - replace

How i can or you done this whishes?????

[parobillard]

I don't know how you program your cnc but it's working fine on my KM-150 with 16 ATC

I can't help you more! My programming style for cnc isn't the same! 

[Anonymous]

// writeBlock(gMotionModal.format(0), gFormat.format(currentSection.isMultiAxis() ? 43.5 : 43), zOutput.format(initialPosition.z), hFormat.format(lengthOffset));

Well done!

all wrongs fixed by "//"