Post processing trouble for Laguna IQ with 4th axis attachment

[Charliegeorgelos]

I recently added a 4th axis rotary attachment to my laguna IQ CNC machine and have been struggling to find/create the correct post processor capable of running both my 4th axis indexing and 4th axis simultaneous tool paths. I have used both the post processor provided on Laguna's website, as well as the post processor in the Fusion 360 Library and neither have been able to post the code without some type of issue. 

Here are some of the problems I am facing:

1. Error: Failed to invoke function 'onSection'.

2. Error: Failed to invoke function 'onOpen'.

3. I have to use G53 as my clearance height, but I want to use the clearance height

Below I attached the Post Processor provided by Laguna Tools. I have been through the forums and tried all sorts of post provided for Laguna machine, however none have worked. I would like to stick with this post, however I know beggars can't be choosers haha. 

I am very new to all this, so any help would be much appreciative. 

Thanks!

Charles

[AdamKunzo]

Hello Charlie,

If you're having trouble with 4axis output from generic post processor, I offer post processor modification as a service and I can sort out this for you.

Send me a message if you'd like to get a help.

[Charliegeorgelos]

Hello @AdamKunzo,

Yes, I would very appreciative of your help!

Thank you

[AdamKunzo]

Sure, I sent you message.