Need a post for fusion 360

[Anonymous]

I'm using a sheetcam post which works with my router, and need a fuson 360 post to match. I have uploaded my to posts. My router uses a piston to lower the right spindle as I have 2 of them, than the z is operated with a ball screw as normal.

[Laurens-3DTechDraw]

The trick is that we can't really convert a competitor product post to a Fusion one.

We can, however, match the output.

The easiest way to get help is do the following:

1. Make a mock up part, and program. (Upload it as well)
2. Post process with the current closest post processor. (Upload it)
3. Mark up all the changes needed in the NC-File. (Upload it)

That way it's easiest to make a post.

[Anonymous]

If I knew what changes needed to me be made I would just have done it myself..... I would gladly pay as I need this ASAP.

[Anonymous]

here is a file that my correct post puts out.

[Anonymous]

So no help for this?

[Laurens-3DTechDraw]

Sorry Paul there is no time set for helping other users out with a post.

Keep in mind that these forums are mainly driven by users.

Please find my Help! My post processor needs to be edited; now what? here: https://forums.autodesk.com/t5/hsm-post-processor-forum/help-my-post-processor-needs-to-be-edited-no...

That will guide you through editting the post with help of the forum.

And find the re-sellers with post processing capabilities here: https://forums.autodesk.com/t5/hsm-post-processor-forum/hsm-post-adjustments-needed-find-your-right-...

[daniel_lyall]

@scottmoyse   @Anonymous I have tagged in the person I suggested to you yesterday to get your post done at a cost if you wont and if you are happy to go ahead with this let him know straight away.

[scottmoyse · Accepted solution]

Hi Paul

We can look at quoting a post for you, which timezone are you in? Please DM your contact information.

[scottmoyse]

Thanks Daniel

[Anonymous]

I'm in USA eastern TZ