I would like my program to post out multiple offset and another set of offset when using multiple wcs ex:
P1 (This line is what i need before my work coordinate and it increment by 1 to as many work duplicates as i tell it to a max of 8)
G54.1 P100
P2
G54.1 P101
P3
G54.1 P102
anyone with knowledge of this please help. thank you
Solved! Go to Solution.
Solved by parobillard. Go to Solution.
Solved by parobillard. Go to Solution.
We would need your post processor to see what you need to change for that.
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
This is the post that I would like to modify. thank you taking a look at this.
There are too many smart people on this forum to not know this answer! PLEASE HELP. I want two offset because one would be for my work offset and the other is for my fixture offset when using multiple work coordinate.
Hi
Try this one
All I did is add:
writeBlock("P" + (p - 99));
AFTER line 818
Try at your own risk!
what range of offset number are you using?
Also will you use the same offset multiple times in the same output, did it need to re-call ex: P1 ?
Ex:
P1
G54.1 p100
(drill1 operation)
P2
G54.1 p101
(drill1 operation)
P1
G54.1 p100
(contour operation)
P2
G54.1 p101
(contour operation)
Try this one then
By the way with your current post you can't use 54 to 59 it has been disabled by someone!
thank you again for the help. I have another question regarding this. I would like it to error out if it exceed 8 offsets?
Can't find what you're looking for? Ask the community or share your knowledge.