Hello Guys,
Is it possible to say, that the machine sway negativ if i use multi axis.
The problem is that the machine run in the limits.
Best regards
Tobi
PS: actually Setting
if (true) { // note: setup your machine here
var bAxis = createAxis({coordinate:1, table:false, axis:[0, -1, 0], range:[-90, 0], preference:1});
var cAxis = createAxis({coordinate:2, table:true, axis:[0, 0, 1], range:[-360, 360], preference:1});
machineConfiguration = new MachineConfiguration(bAxis, cAxis);
setMachineConfiguration(machineConfiguration);
optimizeMachineAngles2(0); // TCP mode - using G141
HI @vonhoegen ,
Use cyclic:true in the kinematic setting. It's specifies that the axis is cyclic.
For example,
cAxis = createAxis({coordinate:2, table:true, axis:[0, 0, 1], cyclic:true, range:[-360, 360]});
Thanks,
HI @vonhoegen ,
I hope you have gone through the technical FAQ. I have shared the link here.
You will get more detail about cyclic and Range in Post Processor Manual .
If you still facing any issues then please contact us. We need some more information regarding you machine.
For example,
Thanks,
Can't find what you're looking for? Ask the community or share your knowledge.