Mazak VC-Ez510 IP with Mazatrol SmoothEz control and rotary axis (4TH) post processor needs.

[kanokwan25310104]

Hello Sirs,

We are technical college school, we just got donated of new Mazak Machining Center Model : VC-Ez510IP with Mazatrol SmoothEz controller. We are using Standard 3 Axis Fanuc controller with Fusion PP for Fanuc. We are looking for 4th rotary axis fr this machine.

If some one here can help, please share the post processor. We will use this machine to practice to teach the student.

Thank you in advance,

DEW

[CNC_Lee]

@kanokwan25310104 

If the generic Mazak post is not providing the required output, I offer post processor development services and happy to work out a solution for your machine! Message me if still needing assistance.

[AchimN]

Hi @kanokwan25310104 

the Mazak post (as most of our posts) does support full 5 axis by default. All you need to do is to select a machine definition in Fusion and adjust it to your needs, no post modification is required for this.

Have a look here for further information:
https://forums.autodesk.com/t5/hsm-post-processor-forum/how-to-set-up-a-4-5-axis-machine-configurati...