Up until about a month ago, I was able to use the NWA Piranha_new.cps post in Fusion 360 to create tool paths for the Shark HD3. Starting maybe 3 weeks ago, nearly every tool path that I generate results in the program starting in the controller, no motion occurring, and then about 5-10 seconds later the controller says the job is finished and exits the job.
Alternatively, some programs run for a period of time making the appropriate cuts and then just stop and act like they finished. The spindle moves up to travel Z and the machine returns to the start point. The software claims the program is done.
The only thing I can think of is that there is some piece of G-Code buried in the program that the controller doesn't like. Fusion updates nearly weekly so it is possible there was some minor tweak along the way behind the scenes.
I poted both G-code files, the last working one, and the last failed one so maybe someone can take a look. As an aside, the setup in the program is identical for both files.
Any input would be great. Thanks!
