Inventor HSM - postprocessor for Busellato Jet 6000

[RUDYBERGAMO]

Hello, in the forum i have found some post processor for Busellato machines, in particular these:

- Evolution-Busellato / 10123_Evolution_cnc_Busellato_M4x

- Evolution-Busellato / 10124_Genesis_cnc_Busellato_M4x

But i have a Busellato Jet 6000 and i would like to know if someone could please tell me where can i found its postprocessor.

I have made some test, and the only one that seems to works(not properly...i can se the preview of the 2D contour but the gcode read a lot of other code that does not interest the cnc process) is the first one.

Can anyone help me?
Thank you.

[RUDYBERGAMO]

Hello, in the forum i have found some post processor for Busellato machines, in particular these:

- Evolution-Busellato / 10123_Evolution_cnc_Busellato_M4x

- Evolution-Busellato / 10124_Genesis_cnc_Busellato_M4x

But i have a Busellato Jet 6000 and i would like to know if someone could please tell me where can i found its postprocessor.

I have made some test, and the only one that seems to works(not properly...i can se the preview of the 2D contour but the gcode read a lot of other code that does not interest the cnc process) is the first one.

Can anyone help me?
Thank you.

[Marek_Skotak]

Hi,

try this code. 

https://www.dropbox.com/s/8mzdume5d3jtcdv/example_busellato.cnc?dl=0

[RUDYBERGAMO]

This works perfectly, it has the correct Z axis set up, and is setted also that if in second operation has the same Z coordinate(for example), the Z "form" in the machine software stay empty so this will take the previous operations...

[Marek_Skotak]

That is fine, i wrote this post not in ISO but in "albatros genesis object" .

[RUDYBERGAMO]

So then, how can i get it? Thank you

[Marek_Skotak · Accepted solution]

Im programming and writing post code for a commercial purposes. If you will need it please contact me.

www.cadcam-softcz.cz