I need postprocessor!

[Anonymous]

I need of postprocessor for 5-axis woodworking mashine PADE CLIPPER M with alphaCAM system.I working on INVENTOR PROFESIONAL HSM CAD+CAM

[matthew.nichols]

I would say on this one; it would be best to send an email to: cam.posts@autodesk.com
be sure to attach all the information controller and all to the email.

[Laurens-3DTechDraw]

If you are looking for a post processor for AlphaCAM I would contact Vero and not Autodesk. 😉

[matthew.nichols]

Laurens-3DTechDraw wrote:
If you are looking for a post processor for AlphaCAM I would contact Vero and not Autodesk. 😉

good point...I was assuming that he was programming with HSM...

[Laurens-3DTechDraw]

MattN. wrote:
Laurens-3DTechDraw wrote: If you are looking for a post processor for AlphaCAM I would contact Vero and not Autodesk. 😉 good point...I was assuming that he was programming with HSM...

Yeah, not sure when you look at his post so I thought it would never hurt to say that. 😉

[Anonymous]

I dont want use a VERO visi!I study for autodeck produkts and i wanna do program with inventor.Its imposible?I thing with correct post processor can make a program!?Co correct?!?my English is not very good, I apologize for that.
my colleagues are programs with Solid Works.here nobody uses Vero VISI.Does it have to use Vero.

[matthew.nichols]

vlado198152@gmail.com wrote:
I dont want use a VERO visi!I study for autodeck produkts and i wanna do program with inventor.Its imposible?I thing with correct post processor can make a program!?Co correct?!?my English is not very good, I apologize for that. my colleagues are programs with Solid Works.here nobody uses Vero VISI.Does it have to use Vero.

You will still want to send an email to cam.posts@autodesk.com
Be sure to include the program manual and an example of nc code that has been ran on the machine before.

[scottmoyse]

Are you a student? Can you find your machine online and share a link showing us and the post team which CNC router you have

[Steinwerks]

Wow that's going to be interesting...

[Anonymous]

Yes, this is exactly the machine you work and want to do it with programs Inventor.How think you can?

[Marek_Skotak]

Which drive control have this machine? Osai10, Fanuc...?

[George-Roberts]

Nice!! Post a video when it's all set up?

[matthew.nichols]

George Roberts wrote:
Nice!! Post a video when it's all set up?

I'm with George on this one...would definitely like to see a video of this one running.

[scottmoyse]

That could be a lot of post work

[matthew.nichols]

scottmoyse wrote:
That could be a lot of post work

Without a doubt...

[Anonymous]

I try but I can not upload any video.Using options below but cant do it.Some help? i ask my bosess for more data of the mashine.I know only the system is a alphaCAM.Video is a realy nice and interested.Im from Bulgaria in one smal town Troyan.Here nobody know some this programing.We have only one programer but his dont wanna talk nothing about program and i began to teach himself.my English is not very good for that I apologize

[Marek_Skotak]

Hi,
Alphacam is a CAM not drive control. But i think that pade have osai10 controller. I have some experience with bacci machine (it is very similar). Do you have sample program from machine?

[Anonymous]

HI,but in no time you will want to download the file from the machine and let it go here.I try to figure out whether this is the controller but I think my boss has no idea of, I will try to talk to the programmer.

[Anonymous]

I checked on the Internet and recognized controller oasai10 I've seen it on the machine as a module in the cabinet of the computer.

[Marek_Skotak]

Ok, i do not know pade Easy. How it works? I have experience from Bacci (if the has their software Pitagora) that i generate from CAM individual NC codes for the operation and it i load to Pitagora. Pitagora optimize NC code (some rapid move, retract during a plane change etc...). And then output from Pitagora was complet code.
Is it similar or how it works?