Haas Post Processor

[Anonymous]

We have just stared up our new CNC TL-1 turning machine, but this machine use

NGC (new generation controller) and the post processor for this turning machine is not included in the Fusion 360 program.

I know that til is machine have a new controller, maybe 6 months old, but when do you think the new post processor will be included in the Fusion 360 program.   

[ArjanDijk]

You should use this postprocessor: 

https://cam.autodesk.com/hsmposts?p=haas_turning

In the future one for the nextgen will come out, but this one works perfect. Only difference is that is does not output a screenshot of your Fusion part while posting.

Nothing you cant miss

[Anonymous]

Sorry, but I have already tried the HAAS Turning post processor, but  it have several errors for the NGC controller, so it simply do not function.

[Anonymous]

Sorry, but I have already tried the HAAS Turning post processor, but  it have several errors for the NGC controller, so it simply do not function.

[ArjanDijk]

Errors like? I can hardly imagine that a newer Haas control will not take code from an older one. For milling its no problem for sure.

[Anonymous]

Yes the milling post processor is ok

[ArjanDijk]

So whats the error?