Forcing feedOutput - Okuma LB3000 with OSP-300 control

[arminooo]

Hi,

I'm using the generic PP for " OSP-300 control" 

https://cam.autodesk.com/hsmposts?p=okuma_lb3000_mill-turn

Two things I need to modify, If you can please help me with.

In the below code (and any other cycles), If the line starts with G cycles, then the line must have all the necessary commands, including Feedrate. But in the generic PP I'm using, if there are 2 or more of the same cycle after each other, then the F only presents in the first one.

.

...

....
G181 X75. C150. Z-42.502 K40. D8.502 F128.(This is already generated and works just fine)
X75. C120. Z-42.502 (as long as the x and z are the same, they should be intoned - so the red ones should be deleted)
X75. C90. Z-42.502
X75. C60. Z-42.502
X75. C30. Z-42.502
X75. C0. Z-42.502
X75. C330. Z-42.502
G180
G0 Z6.
G181 X45.4 C0. Z-45.502 K38.7 D12.802 F128.(Here the Feedrate is missing and needs to be added)
X45.4 C60. Z-45.502 (again, red ones to be removed)
X45.4 C102.22 Z-45.502
X45.4 C180. Z-45.502
G180
G0 Z16.
M12
M146

...

..

.

Also I want to get rid of the red ones

Thanks in advance

[arminooo]

My workaround to this was to change

var feedOutput = createVariable({prefix:"F", force:false}, feedFormat);

to

force:true

 But it adds a lot of unnecessary feeds to all the lines

[Arun.rs]

Hi @arminooo 

Thanks for raising your concern via Forum.

Open 'Okuma LB3000.cps' file in a 'Visual Studio Code' or 'Notepad++' to do the required modifications.

1. To omit redundant X Y coordinates from drilling, follow the methods

    a. Search ' function getCommonCycle '

    b. Put '//' in front of ' xOutput.reset(); ' and ' zOutput.reset(); '

 2. To force feed rate in drilling cycle 

     a. Search ' function onCyclePoint(x, y, z) ' 

     b. Add ' feedOutput.reset(); ' command after the function 

Hope this helps !

Regards

[arminooo]

You are amazing Arun! Have a groovy weekend!

[arminooo]

I have one more question @Arun.rs 🙂

What you said did the trick for me but it also removed the X and Z from the actual cycle command.

G181 X75. C150. Z-42.502 K40. D8.502 F128 (This line still needs X and Z , even if they are redundant)
C120. (These lines are working just fine)
C90.
C60.
C30.
C0.

Thanks again