Fagor 8055 Turning Post Processor Needed

[Anonymous]

Hello,
I need a turning post processor for a Fagor 8055.

Thanks

[scottmoyse]

There isn't one available in the product. I know one reseller that has done it for a paying customer. Please contact your local VAR and ask them about it.

I'm assuming you are using HSMWorks (trial?) and not HSMXpress like you have listed next to your name?

[Anonymous]

I'm using Fusion 360,  and HSMWorks Express with Solidworks.

[skidsolo]

We have a customer who is using this, not the same controller but it might be a good start.

[Anonymous]

That Fagor 8025 post is a generic FANUC Turning post, it doesn't work, but it is a starting point.

[Anonymous]

I have tried this cps file mentioned and I am able to get some of it to work if you run it through the WINDNC free Fagor converter (this allows the 8055iTC to read it). Still having trouble with alot of it, can someone at Autodesk contact me as I would be happy to pay for a fully tweaked post for my machine.

Thank you,
Chad

[scottmoyse]

SkunkWorks wrote:
can someone at Autodesk contact me as I would be happy to pay for a fully tweaked post for my machine.

Autodesk don't charge out their post team, but if you contact your local reseller they will be able to get it sorted for you.

[tacticalkeychains]

I am that 8025 customer, and my post is tweaked from the one they gave you I believe.  It is attached.  I don't believe the Canned Threading cycle works, I can't really remember.  I also part off in the negative direction.

[tacticalkeychains]

I now have a Fagor 8055 and am wondering if you got it figured out?

[tacticalkeychains]

I'm still in need of this post, as well as a few other people.  We are all willing to pitch in $$$ for your time.  We have a working post for turning, but we can't do threading or C axis work.

[chad.blundell]

Just contacted my VAR today as I wanted them to create this post for my 8055iTC (Sharp1118HCNC). Unless anyone has any further developments on this topic?

Thanks,

Chad

[tacticalkeychains]

They just contacted me. Email tacticalkeychains at g mail

[Anonymous]

I know this is an old topic, but I am just curious if a working post processor for the Fagor 8055 TC has ever been achieved? 

I have a Dalian CKE6136i lathe at work and I would like to try to use Fusion 360 to generate the toolpaths for it.

Carl 

[scottmoyse]

---

@Anonymous wrote:

I know this is an old topic, but I am just curious if a working post processor for the Fagor 8055 TC has ever been achieved? 

I have a Dalian CKE6136i lathe at work and I would like to try to use Fusion 360 to generate the toolpaths for it.

Carl 

---

@Anonymous this one works and is supported. https://massif.dev/post-processors/Fagor-Turning

[sukhkenya001]

I need post processor to fagor control 

[scottmoyse]

There is a proven Fagor turning post here: https://massif.dev/post-processors/fagor-turning

[CNC_Lee]

@sukhkenya001 I offer post processor development as a service and can definitely help with this! Email me at: lee@cnclee.com if still needing assistance.