Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
fishtruk wrote:
Thanks Mark, I tried out your post. I changed the easy stuff. Changed the extension to .cnc which my 1100 looks for.
I also remmed out the lines setting the Mcode since the Anilam doesn't need them.
Odd thing is the spindle starts about 5 lines after the Tool# 1 is read.
What Anilam do you have and is this an issue?
Thanks Again!
Nelson
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
* 1001
* GENERATED BY FUSION 360 CAM 2.0.1484
* WEDNESDAY, MAY 13, 2015 091836
* TOOL 4 D=6 CR=0 - ZMIN=-1.962 - FLAT END MILL
* TOOL 5 D=3 CR=1.5 - ZMIN=-3.5 - BALL END MILL
* TOOL 9 D=3 CR=0 - ZMIN=-3 - FLAT END MILL
* TOOL 18 D=1 CR=0 - ZMIN=-2.212 - FLAT END MILL
Dim Abs
Plane XY
Unit MM
Tool# 0
Dwell 0.0
* RETRACT QUILL
Rapid Z0
* 2D CONTOUR4
Tool# 4
Mcode8
X0.03 Y-28.191 Z15.003
Z5.003
Line Z1.003 Feed 200.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
function writeMoveBlock() {
var words = formatWords(arguments), rwords, planeword;
if (words) {
switch (arguments[0]) {
case "G0":
planeword = /G0/g;
rwords = words.replace(planeword, "Rapid ");
writeWords(rwords);
break;
case "G1":
planeword = /G1/g;
rwords = words.replace(planeword, "Line ");
writeWords(rwords);
break;
case "G2":
planeword = /G2/g;
rwords = words.replace(planeword, "Arc Cw ");
writeWords(rwords);
break;
case "G3":
planeword = /G3/g;
rwords = words.replace(planeword, "Arc Ccw ");
writeWords(rwords);
break;
default:
writeWords(arguments);
}
// writeComment(arguments[0])
gMotionModal.reset();
}
}
gMotionModal.reset();to the end of the function.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.