Adtech 4650 5 axis post processor

[marcusjfbrown]

Hi all, is there a 5 axis post processor available for the Adtech 4650, I have a 3 axis post but am fitting a 5 axis unit.

I have heard that a Fanuc should work but am not sure which one I should use, thanks in advance.

[KrupalVala]

Hi @marcusjfbrown ,

We have generic Fanuc Multi axis Milling post-processor with machine simulation capabilities. You can download it from here. It will work fine with Your Adtech 4650 machine.

How to find machine configurations for Fusion 360 Manufacture  :  Click here

In the following link ,you will get to know how to setup your own machine tool using the machine builder functionality.

• Fusion 360 Machine Simulation - Get the basics – How to use the machine simulation by using the built -in fusion360 library.
• Fusion 360 Machine Simulation - Machine Builder – Create a new machine using the new machine builder functionality.

Thanks,

[marcusjfbrown]

Thank you Krupal, Ive tied the post and unfortunately its come up with this error, have you any idea why that is, thanks

[KrupalVala]

Hi @marcusjfbrown ,

Probably you are using the old version of HSMWorks you need to update to the 2021 or the latest version.

After the updating the HSM Works if you are getting the same error then please send me a full error log file.

Thanks,