Hi All,
I have set the kinematic for machine simulation of a standard 3-axis machine Z on the head and table over X and Y, and I set the tool along the X axis.
To orient the operation in the correct direction, I have turned the Z in the X direction in Tool orientation inside the 2D pocket strategy.
The simulation works but in the NC code I have the command for tilting the head, that is strange, see that I have set a 3-axis machine. Do you have any idea?
Thank you!
%
O1001
(MACHINE)
( VENDOR CNC FACILE)
( MODEL TESTA 90 GRADI)
( DESCRIPTION THIS MACHINE HAS XY AXIS ON THE TABLE AND Z AXIS ON THE HEAD)
(T5 D=8. CR=0.5 - BULLNOSE END MILL)
G90 G94 G17 G49 G40 G80
G21
G28 G91 Z0.
G90
(2D POCKET2)
T5 M06
(TORO D8 R0.5)
S6000 M03
G17 G90 G94
G54
G68.2 X0. Y0. Z0. I-90. J90. K90.
G53.1
G01 Z-19.985 Y-8.482 F6000.
G43 X40. H05
G01 X30.
X27.5 F420.
X5.8
Z-19.981 Y-8.479 X5.722
Z-19.972 Y-8.473 X5.644
Z-19.956 Y-8.462 X5.568
Z-19.935 Y-8.447 X5.494
Z-19.908 Y-8.426 X5.423
Z-19.878 Y-8.4 X5.356
Z-19.844 Y-8.367 X5.292
Z-19.809 Y-8.328 X5.234
Z-19.772 Y-8.283 X5.182
Z-19.737 Y-8.23 X5.135
Z-19.704 Y-8.172 X5.094
Z-19.675 Y-8.107 X5.061
Z-19.65 Y-8.037 X5.034
Z-19.632 Y-7.963 X5.015
Z-19.621 Y-7.887 X5.004
Z-19.617 Y-7.808 X5.
Y11. F1260.
Z-26.
Y-11.
Z-19.617
Y-7.808
Z-19.621 Y-7.73 X5.004
Z-19.632 Y-7.653 X5.015
Z-19.65 Y-7.579 X5.034
Z-19.675 Y-7.51 X5.061
Z-19.704 Y-7.445 X5.094
Z-19.737 Y-7.386 X5.135
Z-19.772 Y-7.334 X5.182
Z-19.809 Y-7.289 X5.234
Z-19.844 Y-7.25 X5.292
Z-19.878 Y-7.217 X5.356
Z-19.908 Y-7.191 X5.423
Z-19.935 Y-7.17 X5.494
Z-19.956 Y-7.154 X5.568
Z-19.972 Y-7.144 X5.644
Z-19.981 Y-7.137 X5.722
Z-19.985 Y-7.135 X5.8
X40. F6000.
M05
G28 G91 Z0.
G90
G49
G69
G28 G91 X0. Y0.
G90
M30
%
