G41/G42 not posting with wear selected in 2D Chamfer

[philipfreeman]

Anybody else experienced the above?

[paul.clauss · Accepted solution]

Hi @philipfreeman

Thanks for posting. This is actually a known issue - no posts will output wear compensation with 2D Chamfer. Our development team is aware of and actively researching this issue (internal reference CAM-9952). 

To output the chamfer operation with wear compensation, please replace it with a 2D Contour operation with wear compensation and the "Chamfer" field (under the passes tab) enabled. 

I hope this helps! Please let me know if you have any questions.