3D print, preview mesh bug ?

[hato54]

Strange?

[jeff_strater]

strange, indeed.  Would you be willing to share the model so that we can take a look at it?

Jeff Strater (Fusion development)

[hato54]

Ok, here is the link : http://a360.co/1EgUc7Y

/Håkan

[jeff_strater]

Thanks. Unfortunately, it doesn't look like I can download this. I think you have to check "allow download" in the share command.

Jeff

[hato54]

Strange, I have checked  "allow download" but I will do it again.

http://a360.co/1EgUc7Y

/Håkan

[jeff_strater]

Thanks, I was able to get the file. Not sure why it didn't work the first time...

I don't see the same strange preview that you show. Did you change any settings for the mesh?

I'll keep investigating

Jeff

[hato54]

No it was the default setting.

I just tested the same in my Laptop (PC) and it looks good.

Strange the problem occured in my Workstation (PC).

Could this be a graphic problem?

/Håkan

[jeff_strater]

It could be a graphics problem. You could try updating the driver on your workstation. What graphics hardware do you have on the workstation?

Jeff

[Anonymous]

Hi there, I'm just very curious about your part. It looks like a distributor cap or pressure dome or maybe a Dalek head? 🙂 What is it?

[hato54]

It's a part of a microwave antenna.  

/Håkan

[Anonymous]

Base with no whip? Looks interesting. Thanks 🙂

[hato54 · Accepted solution]

Hi Jeff!

Today I loaded the the part in the workstation again, the mesh was ok!

Strange....

/Håkan

[hato54]

Sorry I don't know what "whip" means.

This is just the cooling frame, inside it will be a butterfly antenna.

/Håkan

[hato54]

Hi, I got this problem again.

Saved and closed the object. Open and then made the mesh, then it was ok!

Sorry but I can't find out what type of graphic card, only some type of Intel card.

/Håkan