Reassociate all dimensions after creating a component from the body

[torZ6MPX]

I've made a drawing from one body in a design, adding loads of dimensions. Later I created a component from the body and selected the component to be included in the drawing. The dimensions doesn't keep the association to the body which is now in a component, and apparantly all needs to be reassociated manually. Is there a way to reassociate all in one operation?

[g-andresen]

Hi,

without insight into the design statements are not possible.

Please share* the file and tell which components, bodies, sketches and dimensions are involved.

günther

* File > export > save as f3d on local device  > attach it to the next post.

[torZ6MPX]

Can't share the design, so I just made a simple example according to the described procedure. Same result. See first 2 attacments here...

[torZ6MPX]

... and the remaining attachments here.

[g-andresen]

Hi,

just reassociate the dimensions

günther

[torZ6MPX]

Since your reply didn't address my request, I'll repeat the request here, with the main points marked:

I've made a drawing from one body in a design, adding loads of dimensions. Later I created a component from the body and selected the component to be included in the drawing. The dimensions doesn't keep the association to the body which is now in a component, and apparantly all needs to be reassociated manually. Is there a way to reassociate all in one operation?

[g-andresen · Accepted solution]

Hi,

---

@torZ6MPX wrote:

Is there a way to reassociate all in one operation?

---

NO

günther

[roblime]

f