Community
Fusion Support
Report issues, bugs, and or unexpected behaviors you’re seeing. Share Fusion (formerly Fusion 360) issues here and get support from the community as well as the Fusion team.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Move/Copy Command - multiple moves finishing on starting point - wrong position

1 REPLY 1
SOLVED
Reply
Message 1 of 2
Anonymous
267 Views, 1 Reply

Move/Copy Command - multiple moves finishing on starting point - wrong position

Anonymous
Not applicable

Using the Move/Copy command the following screencast shows if multiple moves are made with the Manipulator Arrows before hitting OK the body moved can end up in the wrong place. eg a body is moved around a by 5mm square grid using the x axis and z axis Manipulators to return back to the original position.

Despite the body displaying at the original position when OK is pressed the body moves to another position possibly reflecting the last values visible in the Dialog Box distance boxes.

When selecting with the Inspect Tool the snap points do not line up with the body and multiple undo's are required before recovering the original position.

 

0 Likes

Move/Copy Command - multiple moves finishing on starting point - wrong position

Using the Move/Copy command the following screencast shows if multiple moves are made with the Manipulator Arrows before hitting OK the body moved can end up in the wrong place. eg a body is moved around a by 5mm square grid using the x axis and z axis Manipulators to return back to the original position.

Despite the body displaying at the original position when OK is pressed the body moves to another position possibly reflecting the last values visible in the Dialog Box distance boxes.

When selecting with the Inspect Tool the snap points do not line up with the body and multiple undo's are required before recovering the original position.

 

1 REPLY 1
Message 2 of 2
jeff_strater
in reply to: Anonymous

jeff_strater
Community Manager
Community Manager
Accepted solution

I created bug FUS-56988 to track this.  From my limited testing, this only shows up in cases like this where the body ends up in its original position.  However, we will investigate, and see whether that theory is correct or not.

 


Jeff Strater
Engineering Director
0 Likes

I created bug FUS-56988 to track this.  From my limited testing, this only shows up in cases like this where the body ends up in its original position.  However, we will investigate, and see whether that theory is correct or not.

 


Jeff Strater
Engineering Director

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report