support

[Anonymous]

hello,im am new to fusion 360 and I'm am looking for some help on building a toolpath and getting that fill to mach3 so it will cut,i have managed to get what I thought was a proper toolpath built and moved to mach3.but when I run it on my plasma table it with run the shape of the part but is not turning on the torch

[paul.clauss]

Hi @Anonymous 

Thanks for posting! Which post processor are you using? You should be using the Mach3 Plasma post.

You'll also need to use a Cutting toolpath and CAM setup. This video may be helpful.

I hope this helps - please let me know if you have any questions.