new sketch button is missing

new sketch button is missing

Anonymous
Not applicable
3,960 Views
8 Replies
Message 1 of 9

new sketch button is missing

Anonymous
Not applicable

I accidentally removed my new sketch button from the toolbar. Because of that I can no longer create a new sketch. If you know how to get the new sketch button back or start a sketch a different way please tell me.

0 Likes
Accepted solutions (1)
3,961 Views
8 Replies
Replies (8)
Message 2 of 9

jeff_strater
Community Manager
Community Manager
Accepted solution

right click in the toolbar and choose "reset all toolbar customization":

Screen Shot 2019-06-21 at 7.35.01 AM.png

should do the trick...


Jeff Strater
Engineering Director
Message 3 of 9

HughesTooling
Consultant
Consultant

Rather than reset all your toolbars it should still be on the dropdown menu, just click the 3 dots and repin it to the top toolbar. Other ways to start a sketch, right click a face or plane and there's an option Start Sketch on the right click menu, press S and start typing Sketch or press Alt+S.

Capture4.PNG

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


0 Likes
Message 4 of 9

novakZ4XBZ
Observer
Observer

I have create sketch.  I am looking for the item on the menu that says SKE TCH. It is before Create.  I was watching a video and I should be able to click the down arrow for points.  I also do not have a square, menu item that says MODEL.   I have read all sorts of things as to how to get it to show up and nothing!  https://www.youtube.com/watch?v=3Iu6UVemyiA&t=154s 

Thank you. Margie

0 Likes
Message 5 of 9

carl.j.barker
Collaborator
Collaborator
0 Likes
Message 6 of 9

jeff_strater
Community Manager
Community Manager

you are referencing old training material.  Today, the sketch menu does not appear until you are in sketch mode (after you have created a sketch).

 


Jeff Strater
Engineering Director
Message 7 of 9

Anonymous
Not applicable
The three dots are gone, how do you get the three dots back so you can get the Sketch tab re-pinned?
0 Likes
Message 8 of 9

TheCADWhisperer
Consultant
Consultant

@Anonymous 

Can you post screen shot of what you DO see?

TheCADWhisperer_0-1636568246350.png

 

0 Likes
Message 9 of 9

Anonymous
Not applicable
I figured it out. I was watching a tutorial that used an older version.
0 Likes