Marking areas

[hofmesa]

Hello, 

I got an issue which come up a few days ago. If I want to mark several areas for extrusion as usual, they are no longer highlighted in blue. Can I reactivate this in the settings?

Thank you for the information on this

[seth.madore]

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

If you can't share your file, can you at least share some images of what you're seeing?

[hofmesa]

Thank you for your fast response, 

usually when I want to do an extrude, I can choose every area of my sketch(this areas are marked in blue colour). But now there is no blue marking an I cant see what areas are choosen. 

I haven't changed anything in the basic settings of Fusion360

Any ideas ?

[seth.madore]

Seems to be working for me:

[g-andresen · Accepted solution]

Hi,

1. update your graphic drivers

2. TRY: Service Utilities > Repair

günther

[hofmesa]

Hey, 

does it work whne you whant to mark all areas with "ctrl" ? 

[hofmesa]

I installed the actuall graphic driver and do the repair like your instructions. 

both doesn't work

[hofmesa]

Hm I

done the reset in the service utilities and then switch graphic presets --> Limit effects

Now it works fine again.

Thank you guys for your tips and fast response.

Kind regards,

Bernard

[HughesTooling]

You could also try the different graphics drivers in Fusion. This has worked for others.

[g-andresen]

Hi,

please note in the future not to reply by "Post Reply" but to reply directly to an individual request.

günther