How to select center of mass?

[Alec_Mallinger]

Hi, I need to select center of mass, yet there is no way that I have found yet that allows me to do so. I have the center of mass on the object, I just need to be able to actually select it as a point. Is this possible?

[ryan.bales]

It's mostly specific to whatever function you are doing. What are you selecting it for? 

On trick on something like Inspect > Measure is to use click-and-hold to bring up the selection window. Then you can pick it no issues. It's also selectable in the browser as i have it shown expanded:

[Alec_Mallinger]

Hi, thanks for that, but is there any way to select it as a point for a sketch?

[ryan.bales · Accepted solution]

Not directly no, you'd need to pull the data manually and create the plants/axis/points etc.

To my knowledge its still mostly a visual reference and a dimensional point. @jeff_strater  is this still correct? 

[jeff_strater · Accepted solution]

Correct, the current center of mass icon is very limited - you can see it, and use it in Measure, but that's the extent of it...

[hpekristiansen]

You can run the script created by ekinsb here:

https://forums.autodesk.com/t5/fusion-360-api-and-scripts/can-the-fusion-api-call-center-of-mass-inf...

[jhackney1972]

I ran across your forum post where you desired to place a point on the center of gravity (COG) of a body or component.  I recently wrote and recorded a blog article where I do this very operation.  I would like to invite you to take a look at the article and video.

[nomiakasu]

Implementing jhackney1972 's solution would be ideal. A simple point created at the COM icon should be trivial to code and very helpful. 

[_ritchie]

Bump on this from 2025 (!). @ryan.bales or @jeff_strater is it still not possible to bind a sketch point to the dynamically generated CoM for use later in the timeline? I understand and accept that subsequent operations could change the CoM.