Hello, I just installed the trial version of Fusion 360. All is well except for locating a good...

[FacebookGroupMember]

Hello, I just installed the trial version of Fusion 360. All is well except for locating a good tutorial on how to use the software. When I looked at a couple of YouTube vids, it didn’t seem like the software versions lined up meaning the videos were from an older version of fusion. So my question is are there current tutorials that matches the current software revision or can I get an older copy of software to match the existing videos. I’ve not used any type software like this and it has been a little bit of a struggle to make heads or tails on how to use the program.

[g-andresen]

Hi,

try this way:

günther

[FacebookGroupMember]

For CNC machining, you gotta try Titans of CNC. I learned so much from them.

[FacebookGroupMember]

I’ve found some really useful videos on fusion360 own YouTube channel. Yes a few buttons are in different places and I’ve had to ask a couple of bits but they generally line up ok. Good luck! Ps I’ve just done this one and it was ok on the new version of f360

https://youtu.be/3PnKBSOulwo