Fusion360 cause high heating/loud cooler/fast battery draining.

[Anonymous]

Hi there.

In my case, I m working on a brand new Macbook Pro 13'' 2019, and ..as u can read the title..it's causing big problems from the first minute of opening the Fusion360.

The F360 app, is using around 160% of my CPU...said the monitor application.

I must say, when i'm using F360, 0 applications are in use except the F360.

The battery is draining really bad, like 2% in 1 minute.

I don't have installated any 3dconnextion mouse or something.

Any ideas of solutions please? 

Thank you, mates ! 🙂 

[MoshiurRashid]

Please visit this post and see the accepted solution. I'm pretty much sure that you are facing the same situation.

https://forums.autodesk.com/t5/fusion-360-design-validate/fusion-360-using-over-100-of-cpu-at-idle/m...

[Anonymous · Accepted solution]

Thank you for the reply.

It didn't actually helped me, but i found the solution.

When my macbook is offline, the cpu is going crazy to 160%, but when i have a connection the cpu is running at 8-10%.

So i switched the F360 to offline work, and now it is fine.

Hope it will help somebody with the same problem :). All the best !!