Fusion does not show sketches

[mgrauZ237M]

Hi folks

I have begun a "Erhebung" (sorry don't know the English name of the feature) which consists of several sketches along a spline. These will then form the chainstay of a bicycle (see screenshots). As I now wanted to add more sketches on the spline, it's not visible anymore, although visibility for all elements is on (see screenshots). The spline just faintly shows when clicking on sketch13 but will disappear at any next action (see attached Rahmen v4). I therefore can't create the planes perpendicular to the spline, necessary to place the sketches upon. 

This is also the case after restarting Fusion 360.

Thanks for your help

Mani

[RajkumarIlanchelian · Accepted solution]

Hi,

Taking a look at the f3d and your information provided, it looks like you are trying to select Sketch 13 as part of your selections? I see from the browser that Sketch 13 (Pfad Kettenstrebe) visibility is turned off as these are consumed by different bodies). To make them visible simply click on the "eye" icon in the browser to make them visible. Hope this helps!

[mgrauZ237M]

Hi Rajkumar

Thanks a lot! Didn't know that turning on visibility for all working elements doesn't turn it on for all of them...

It works via the browser.

Do you happen to know how I can have my auxiliary planes perpendicular to the spline (no problem) to coincide with a point on the spline (don't see how to achieve the second)?

Thanks

Mani