Flare around cylinders base
You show a link to your project but you forgot to allow download.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
If that is the case, you can always share your Fusion 360 model by opening it up, go to the File menu, select Export and save it to your hard drive. Then you can attach it to the Attachment section of any forum post.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@jhackney1972 yeah, the Personal Entitlement is restricted in this department. I've stopped asking for the A360 link and just went straight to requesting the .f3s/.f3z model
Seth Madore
Customer Advocacy Manager - Manufacturing
Ok I'm sorry guys/gals im learning not only 356 im learning how to post.... I needed to do two things left and have no idea on how to do either. Is this the correct forum to post questions?
1) I need to create a "Flare" around cylinder(s) ends.
2) I need to widen the hole in the top like in the image.
This is the best I can do with your model. I have no idea how to get a flare around the side-to-main pipe due to the intersection to the top connection body. You did not give any dimensions for the top cutout so I just used something that looked good. My attempt is attached.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Here you go.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
.jpg){kind=link}