Export STEP file empty
What's in the design you're trying to export? Fusion can only export surfaces and solids to STP, no meshes, sketches etc.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
There's no file attached, you need to use the forum to attach files. If you've imported a STL file you will not be able to export it to STEP as Fusion does not support meshes in STEP files.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
What are you hoping to do with the file when its converted? If you have History off you can select a mesh and convert to a brep but it will still basically be a mesh and if you are trying to get a part machined there's a good chance machine shops will not be interested.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
What did you create? can you export the design as an f3d and attach here. Only other time I've come across failed exports was if there were non standard characters in the file name or path.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
