dialogue box is not scaling

dialogue box is not scaling

joerg.Fusion360
Participant Participant
1,832 Views
4 Replies
Message 1 of 5

dialogue box is not scaling

joerg.Fusion360
Participant
Participant

Hi Support Team,

 

I found a strange behavier with the dialogue box. They are not scaling.

 

This happent with the joint and animation dialog box.

I can scale only horizontally but not verticular.

 

After I a minimized the box, I can see the full content.

 

If you need more screen shots. see dropbox

 

https://www.dropbox.com/s/l8qxmdr1h6tij38/2017-05-13%2008_37_13-Autodesk%20Fusion%20360.png?dl=0

https://www.dropbox.com/s/fbp504gkjhwgad3/2017-05-13%2008_37_30-Autodesk%20Fusion%20360.png?dl=0

https://www.dropbox.com/s/awxb7jdl5on8679/2017-05-13%2008_37_42-Fusion360.png?dl=0

 

Many thanks!

 

Best regards

 

Jörg

0 Likes
Accepted solutions (3)
1,833 Views
4 Replies
Replies (4)
Message 2 of 5

mike.tessier
Alumni
Alumni
Accepted solution

Hi @joerg.Fusion360,

 

Thanks for posting and welcome to the Fusion 360 community!

 

I just did some quick testing on my machine, and I think that this behavior might actually be intended. Also, I found that this behavior occurs with any dialog box that has been pinned to a side within Fusion 360. I noticed that if I drag the dialog box away from the side that it is pinned to, I can resize the box to however big I would like it to be. I recorded a quick screencast to demonstrate and explain this behavior a little bit, just because it is a little difficult to grasp from a text description.

 

 

 
I hope this helps! Please let me know if you have any questions or concerns.
 
Cheers,
Mike Tessier

Product Support Specialist



My Screencasts | Fusion 360 Webinars | Tips and Best Practices | Troubleshooting
Message 3 of 5

joerg.Fusion360
Participant
Participant

Hi @mike.tessier,

 

many thanks for the video.

 

Now I understand why the scaling itn't working and the idea behind the locked box. My expectation was a autoscaling dialog box, driven by the content.

 

Its a bit different to other programs, but I will get used to it.

 

Thanks for your support.

 

Cheers Jörg

 

 

 

0 Likes
Message 4 of 5

HughesTooling
Consultant
Consultant
Accepted solution

One thing to note is dialog boxes will only auto-resize if they're docked to the right side of the screen. They will not resize if they are docked to another dialog or to the left side.

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


0 Likes
Message 5 of 5

HughesTooling
Consultant
Consultant
Accepted solution

In the sketch environment you'll need to dock the dialogs like this and they will reliably resize.

Capture4.PNG

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


0 Likes