problem with tutorial

[cekuhnen]

I follow the steps and this part always fails to compute!

[amaultsby · Accepted solution]

Click the red arrow on the geometry preview to invert your geometry.

The blue area is what will be cut. As you have it now, it tried to do the adaptive clearing on the ring, and not the material around / inside it.

Because the tool is too large to fit inside any of the features, no toolpath is created.

Hope that helps!

-Alan

[Trigg3r · Accepted solution]

Here's a screen cast to show contour selection.

https://screencast.autodesk.com/Embed/Timeline/5b3e38c1-277a-4276-a44c-e69521078418

[anthony.graves]

Thanks for posting the Screencast Trigg3r!

Anthony Graves

Product Manager, CAM