Hello
I'm new to fusion 360 . I have a stepcraft 600 and I use UCCNC. What post process do I use for UCCNC because they don't have one for UCCNC.
Who can help me thanks
Solved! Go to Solution.
Solved by Steinwerks. Go to Solution.
Hello
on the stepcraft forums there a post process for stepcraft in the Library there is Nothing There stepcraft
what is the link to the one you found in a forum?
Hello
l'm not the best at doing links here go
stepcraft.systems.com/service & support stepcraft forum. English forum . Machine software
then look for post processor . Sorry that's the best I can do
@Anonymous also if you go here and search for Stepcraft or UCCNC you will find a post processor: http://cam.autodesk.com/posts/
Hello
the Second link above dose not do anything. I still have not come across for Uccnc post process link what works
fine me a link what works. So I can use it or I can not use this software
@Anonymous wrote:
Hello
the Second link above dose not do anything. I still have not come across for Uccnc post process link what works
fine me a link what works. So I can use it or I can not use this software
You have to use the Search field:
If this doesn't work you may want to try a different browser.
Hello
Thanks . ok i download the small file. now do just copy i fusion 360
Here is what you need to do, if you own a Windows PC
Move the file to a folder that you have created on your hard drive. DO NOT MOVE IT TO THE FUSION FOLDER. They get overwritten each update
Go to Fusion CAM. In the post dialog, you are going to go to top right to the button named Setup. Click on it and choose Personal Posts. Go to the address bar to the left and direct it to go to the folder where the post is stored. While you may find the folder, it won't show any contents. That will be in the drop down menu below:
There is also the Cloud Posts which can be added to (and removed) via https://a360.autodesk.com/ and signing in. They are stored in the A360 Drive in a folder called CAMPosts.
Hi Matthew, I am trying to load a post processer (Stepcraft UCCNC) that I downloaded from your Steinwerks suggested location as my current version of F360 CAM doesnt contain it? I have done so buy the 'standing instructions' on the site for loading software dont appear to apply. I would be grateul of some direction please.
Have you tried the steps laid out by LibertyMachine a few posts above?
Are you on PC or Mac?
Hi Seth, many thanks for the response. Yes, I am on W10. I did spot the mail thanks and just in case I have tried it a couple more time during the last 30 mins.....just in case.
I put the downloaded file in a folder on my desktop called stepuccnc, I think that you can just see it on the attached screen shot. I then followed the steps but the content does not show up in the box numbered 3. The file seems pretty small (44kb) is that correct?
Regards
Paul
Ok, it doesn't appear that you drilled down deep enough into the desktop. You should have Desktop/stepcraftcnc in your folder string
Hi Seth, yes I noticed that. However, I just selected it straight from the Download file and all was fine. I use IoS most of the time so have no concept of W10's 'features', as IoS just works.
Many thanks for your time sir.
Regards
Paul
Funny you should say that. I just got a Macbook Pro and I'm feeling frustrated due to the lack of finding things in a manner that makes sense to me!
Can't find what you're looking for? Ask the community or share your knowledge.