Help - Lathe - Slotting with live tooling

[rw_skinner]

I've cut slots on the face before but I always used a profile and cut to depth in one pass.

On this project, I can do the same, however, I need to do a .060" DOC per pass.  Where am I going wrong?

Haas ST20Y

[a.laasW8M6T · Accepted solution]

Hi

Try this

[rw_skinner]

Thanks for your help and video!  I found the deal with using multiple finish passes about an hour ago and was really trying to fine tune the lead in and lead outs.  Your video also gave me some other ideas as well.

Thanks again!