HAAS POST Rotary Unclamp before 5x toolpath

[instcell]

Hey Guys

I removed the rotary clamp and unclamp from my Haas next gen post. I did this because it takes so much time, and the machine already does that when necessary.  I followed the instructions here:

 https://forums.autodesk.com/t5/hsm-post-processor-forum/removing-m10-m11-m12-m13-in-the-post-process...

BUT: During simultaneous toolpaths like swarf, I need M11 and M13 to remain in order to unlock the rotary. 

Can anyone help? 

Thanks!!

Alex Kern

[instcell]

Hi, 

I have an issue... for some reason the machine is not clamping anymore. Our post is the same, I checked and made sure all of the edits were still there.

Could something have changed in Fusion 360 to cause it to not reclamp the B and C?

Thanks,

Alex Kern