Hi there
is a way on Fusion 360 to machine a 3D contour just of a face, in this case just want to machine the interior curved face on other direction I can do that with parallel, put it select all the surfaces nor just the one curved side.
I've put some images of what part I’m trying to do a finishing
Best Rishi Vadher.
Rishi Vadher
Personal Page
Facebook | Twitter | LinkedIn
Solved! Go to Solution.
Solved by rishivadher. Go to Solution.
Solved by fonsecr. Go to Solution.
Set the machining boundary for the Contour operation to machine with the "tool center" going to the Silhouette. This is controlled on the Geometry tab (the 2nd one).
Hi fonsecr
thanks for the replay. Made a simple machining with foam just for test, and the result was this without the finishing. And now when have some time will machine it in wood, the toolpaths are like this the images below.
Best Rishi Vadher.
Rishi Vadher
Personal Page
Facebook | Twitter | LinkedIn
in foam is looks like this 😉
Rishi Vadher
Personal Page
Facebook | Twitter | LinkedIn
Can't find what you're looking for? Ask the community or share your knowledge.