Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Can you force a preferable axis clearing toolpath direction?
Can you force a preferable axis clearing toolpath direction?
I have been attempting to clear a larger amount from my stock wood using the default setup adaptive method. However I have found that that it only works well when moving the axis aligned with the grain. When using the axis across the grain the bit seems to skip and chip the wood.
Is the a way to specify to the toolpath so that it prefers one axis (say X) over the other axis?
It would help if you could upload the Fusion file.
However if you only wish to machine in a specific direction then pehaps a Contour operation with a fairly large tool and stepping over and then back the way it went, that would keep the tool going in a specific axis direction.
Fusion
