Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Additive - Feature Request - Additional prime distance after retraction
Additive - Feature Request - Additional prime distance after retraction
As I use PETG more and more, I'm noticing that retractions end up causing lack of material when it initially reprimes the nozzle to continue printing. I'd like to see an option for an additional prime amount/distance to ensure adequate material flow is present when the nozzle goes down again.
Retractions in my settings are very small, at only 0.4mm, as I use a direct extruder. I would have anticipated this to be a non-issue, but it happens every time I print PETG.
Fusion
