The problem with 5-axis processing

[Sverhu]

Hello! Help solve the problem. I have a problem, I don't get accurate processing along the trajectory, the smooth processing line for some reason goes in zigzags. Examples in screenshots. I can't find an error in the postprocessor

[engineguy · Accepted solution]

@Sverhu 

Try changing the Tolerance value under the "Passes" tab from 0.1mm to 0.001mm and it should be better, see images below, first image is toolpath in Mach3 with 0.1mm Tolerance and the second image is with 0.001mm tolerance.

Hope this helps 🙂

Tolerance 0.1mm

Tolerance 0.001mm

[Sverhu · Accepted solution]

Thanks for the help, but this option does not work with other models. The problem is still in the postprocessor