Roughing profile turning with leave stock bug

[Lonnie.Cady]

When I turn on the leave stock with a roughing passes the tool path violates the model.

See attached pics, one with no stock and one with stock turned on.

[Lonnie.Cady]

Also discoverd when you just want to take a finish profile cut and leave stock with no roughing passes it fails to generate any toolpath and you get a yellow warning.

[jeff.walters]

This could be a few things. Do you have your model selected in the set up? If there is a hole or flat you may need to use spun profile.  

[Lonnie.Cady]

Yes model selected and spun profile used

http://autode.sk/1gtrKJC

http://autode.sk/1Uz1cpx 

[jeff.walters · Accepted solution]

There are issues reported with the spun profie that could be causing this issue. the workaround is to use Intersect an manualy create the spun profile.

[Lonnie.Cady]

Thanks @jeff.walters I will check it out when I get more time.  I will have to rotate the part to see if I can get a good intersection since there are milled flats and radial holes in the part.

Strange that leaving stock is what triggers it???

[Lonnie.Cady]

@jeff.walters, creating a spun profile manually has worked as a work around for this issue.