Problem turning contours into tool paths

[tom]

I am have a problem getting fusion to recognize the contour selected and turn them into to toolpaths.   This should be so simple!  Do I really need to sketch a tool path?  Tom

[HughesTooling]

As I requested in your other thread, can you share the design?

Mark

[tom]

https://a360.co/3EuV9iU

[HughesTooling]

This seems to work OK for me. Looks like you selected the edge the same way in your image above or are you trying to do something different?

Mark

[tom]

That solved it.....   I was doing the same thing accept I chose all the edges in the contour.  You chose the two parallel edges and the rest of the contour chose to fill in.   I am not sure this is a good thing.  The difference being on what edge you clicked first.   

[tom]

Are you sure this is not a glitch in the new software?

[tom]

It had to do with my stock to leave   Is there a up level threshold for tool clearance that would effect the stock to leave?

I have a .250" end mill  an .3125" slot and was want to leave .010" per side for finish pass.....

[HughesTooling]

With the stock to leave added you need to reduce the minimum cutting radius.