Post Processor G54 at end of program edit

[griptechshop]

Hi,

Could anyone amend this post to have the table go to G54  with X0 and Y0 instead of going to G28 X0 Y0 at the end of the program.

John Saunders edits the Tormach post here, but the fanuc post is more involved and a little out of my league to edit. 

Much appreciated,

Trevor

[daniel_lyall · Accepted solution]

What fanuc post are you useing thats a simple edit the one attached is the standard fanuc post.

If it's a different post can you post that the line that needs the change is 2273, I changed the 28 to a 54

[griptechshop · Accepted solution]

Hi Daniel,

Thanks very much. will try it on Tuesday.

Trevor

[daniel_lyall]

I suggest to NYCCNC to use the new post editor in his videos it makes editing a post simple as mud.

The one here https://forums.autodesk.com/t5/hsm-post-processor-forum/autodesk-hsm-post-editor-for-visual-studio-c... for simple edites it makes it easy.