post process failing

[caddzeus]

Post process has started failing. All settings used have worked hundreds of time before today's efforts. All old projects that have worked in the past are now failing. I've created a file that I'll attach along with a log showing the failure and a screen shot of the post settings. Sometimes it produces empty .tap files, sometimes it produces incomplete .tap files.

[caddzeus · Accepted solution]

The problem was apparently writing the gcode out to a flash drive. This has been my standard operating procedure in the past and worked well, but now it's having issues. Will post to a local disk from now on.

[nickabee11]

same issue. in the recent month i have not been able to post directly to a flash drive from any off the PC's i use with fusion 360. i have posted directly to flash drive for well over a year, all of a sudden i cant.

[seth.madore]

This is a known issue when posting to a root drive. There is a ticket open for this and it will be fixed in a future update.

The workarounds are as follows:
1) Use NC Programs to post out your code. Right click on the Setup and "Create NC Program". 

2) Create a subfolder on that drive and post to that, transfer the files over

3) Set destination as a subfolder, but at posting confirmation, select the root. Only one extra click that way