Brand new to Fusion 360 and am having trouble figuring out where I went wrong here. When going to post process, I get this error:
Information: Configuration: Generic Tormach PathPilot
Information: Vendor: Tormach
Information: Posting intermediate data to 'E:\mill turn tool holder_shaping.nc'
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Sunday, October 01, 2017 8:29:18 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.2.1 41465
Configuration path: C:\Users\Owner\AppData\Local\Autodesk\webdeploy\production\5308b208c635b362e208fc86d5a97f2fcda381e2\Applications\CAM360\Data\Posts\tormach.cps
Include paths: C:\Users\Owner\AppData\Local\Autodesk\webdeploy\production\5308b208c635b362e208fc86d5a97f2fcda381e2\Applications\CAM360\Data\Posts
Configuration modification date: Monday, August 07, 2017 7:45:28 PM
Output path: E:\mill turn tool holder_shaping.nc
Checksum of intermediate NC data: dcc198906aa430980a81e561c15d5e87
Checksum of configuration: 7831c1a03d5910cf8a7ccfd0fca1b7ee
Vendor url: http://www.tormach.com
Legal: Copyright (C) 2012-2017 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.3410
...
Error: Work offset out of range.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Sunday, October 01, 2017 8:29:18 PM
Post processing failed.
-Work offset out of range-
Where do I need to go to see the range of my work offset? Thank you in advance for the help!
