Online Cam Tutor

[richardsalzman]

I am looking for someone who offers online CAM tutoring.  I need somewhere from a half hour to an hour.  I have been stumbling with handling stock from previous operations and a few other basic concepts.  Nothing really complicated.  I have received some unbelievable assistance from this forum, but I do not want to take advantage.  I am happy to pay for this assistance and appreciate any suggestions.

Thanks.... Richard

[dorukhanPUMCA]

I can help you for that. Can you give more information about that? You can send mail too [email protected]

[engineguy]

@richardsalzman 

The Forum is designed to do exactly what you want, you are not "taking advantage" at all, far from it, every time you have a problem that someone on the Forum solves for you be it Autodesk employee or other folks that is not only helping you but lots of other people who can find a solution that you got in the Knowledgebase.

Please, keep asking for solutions on the Forum, it does help many people and of course Autodesk to make the software better 🙂 🙂 🙂

If you have a Fusion file that needs some explanation then upload it for investigation and I am sure someone will help quite quickly, if it is within my abilities such as they are I would be happy to do a short video that may help bring other assistance to you 🙂

[richardsalzman]

Hello Engineguy,

I can't express how much fantastic help I have received from this forum!!!  I have received help from you and a number of others that have simply gone over the top with great direction.  Someone even posted a 45 minute video to help with a previous issue.  Simply Amazing!

As per your direction, I will continue to post my questions and thanks for your encouragement. 

At this point I will also reach out to the gentlemen who offered to help as well as I think if I could spend 30-60 minutes one on one it may be more effective in helping with a few areas that I continue to stumble upon.  Nothing big, just looking for a few tips regarding pickup up stock from previous operations as well as some tips on sketches.

Thanks again for all your help!

[CNC_Lee]

@richardsalzman 
I offer remote Fusion 360 CAM training via Zoom as a service. Email me at [email protected] if I can be of any assistance!

[programming2C78B]

Ensure your stock model is a component, not a body! For some reason people don't share that part of critical info....

[richardsalzman · Accepted solution]

Thanks for your suggestion.  I did see this note on a video of using stock from a previous operation.  Yes, I did select the component, not the model.