need help with c axis post processor

[j_cavender]

we have a johnford lathe that has live tooling and c-axis im am having trouble finding a post processor that will work for these functions it has a fanuc oi control.

[j_cavender]

is there any body who writes posts?

[j_cavender]

anybody?

[Steinwerks]

http://forums.autodesk.com/t5/post-processors/bd-p/218

Be aware that this is a forum and not any official support line. If you need a PP immediately your best bet is to find a reseller. I have a C-axis Fanuc post somewhere but I will have to dig it up. I have not used it yet so can't guarantee its effectiveness.

[j_cavender]

hey thanks for the reply ive tried contacting resellers and no response.

[Steinwerks]

See what this does for you. Like I said, I haven't tried it yet.

[jeff.walters]

can you email me the resellers that didnt respond please? [email protected] 

[j_cavender]

Still havent heard from anyone

[Anonymous]

I can help out a little bit, I have some edited post, you will still have to make some small adjustments but for the time being I am able to make them run. I have some programs I hand wrote for milling, Drilling and taping with the live tooling if your interested in looking at them I will share them with you. I bought the Fanuc simulator DO NOT WASTE you time or money that was a big let down, GARBAGE. I am in the same boat as you, Johnford ST-60B and nobody has much to share on here for that particular machine and control. I will PM you some info.